High Viscosity Jacket Type Asphalt Oval Gear Flow Meter Supplier

Product Detail

Product description:

 



 

 

diesel fuel flow meter/oval gear flow meter

Diesel fuel flow meter/ oval gear flow meter is used to transfer high viscosity liquids with good repeatability and durability. It is widely used on petroleum, chemical, food industry ect.

 

 

Application:

 

Oval gear flowmeter is mainly used for high value liquids such as oil, chemical etc.
Main applications include unloading, transfer and consumption monitoring.
Petroleum,chemical processing,medicine,transportation,food ,ect.

 

Specification:

 

 

 

Type	DN	Viscosity (MPa. s)
		<0.3	0.3~0.8	0.8~2		2~200		200~1000		1000~2000
LC-10	10		0.2-0.5		0.08-0.5	0.08-0.5	0.05-0.5	0.06-0.3	0.03-0.3	0.03-0.2	Flow Range unit:m 3 /h
LC-15	15		0.75-1.		0.3-1.5	0.3-1.5	0.15-1.5	0.2-1.0	0.1-1.05	0.07-0.75
LC-20	20		1.5-3	1-3	0.4-3	0.5-3	0.3-3	0.4-2.1	0.2-2.1	0.15-1.5
LC-25	25	4-6	3-6	2-6	0.8-6	1-6	0.6-6	0.8-4.2	0.4-4.2	0.3-3
LC-40	40	9-15	7.5-15	5-15	2-15	2.5-15	1.5-15	2.1-10.5	1.0-10.5	0.7-7.5
LC-50	50	10-24	8-24	8-24	3-24	4.8-24	2.4-24	2.4-16.8	1.6-16.8	1.2-12
LC-B40\50	40\50	8-20	6-20	6-20	4-20	4-20	2-20	2.8-14	1.4-14	1.0-10
LC-B65	65	27-40	20-40	15-40	5-40	8-40	4-40	5.6-28	2.8-28	2-20
LC-80	80	40-60	30-60	20-60	8-60	12-60	6-60	8.4-42	4.2-42	3-30
LC-100	100	67-100	50-100	34-100	13.-100	20-100	10-100	14-70	6-70	5-50
LC-150	150	38-120	38-120	40-120	12-120	24--120	12-120	15-100	10-90	16-80
LC-200	200	227-340	170-340	114-340	43-340	56-340	34-340	47.6-238	23.8-238	17-170
LC-250					80~500	150~450
Accuracy class		0.5	0.5	0.2	0.5	0.2	0.5	0.2	0.5	0.5
Note	"gal/h" could be special ordered.

 




Shell and cover	cover plate	oval wheel	Rotary shaft	Sheath of shaft	Nominal pressure(MPa)
LC-A	Cast steel	Cast iron		Stainless steel	Bronze(with oil) or rolling bearing	1.6
LC-E	Cast steel	Cast iron\Stainless steel				Under DN50 6.3 DN80-100  4.0 DN150-200  2.5
LC-Q	Cast iron	Cast iron	Alloy aluminum, engineering material		graphite	1.6
LC-B\C	Stainless steel	Stainless steel	Stainless steel		graphite	1.6\2.5
LC-L	Cast aluminum	Cast iron, Stainless steel	Alloy aluminum, engineering material		Bronze(with oil)\graphite\rolling bearing	1.6
Notes:1. OCr18Ni12Mo2Ti for type LC-C;OCr18Ni9Ti for type LC-B. 2. Flange is convex under 2.5MPa ,and roughness at 6.3 MPa;and both of the above at 4.0 MPa.